Capacitors FC Series (Hi-Sar)



  • Low impedance in the range of frequencies (listening 10 khz ÷ Clock)
  • current High пульзации due to the low ESR
  • Improved-noise characteristics
  • thermal stability of capacitance, impedance and ESR
  • Designed for smoothing and шумоподавляющих filters
the FC Series

Hi-CAP – electrolytic capacitor, using in the capacity of electrolyte high conducted polymer. Has an excellent temperature stability in the load mode, due to the use of термостабильного type of polymer. In comparison with other electrolytic capacitors, Hi-CAP-low-impedance capacitor, suitable for use at high frequencies. Ideal for digital equipment.

Temperature range -40 ~ +105oC
leakage Current (max.) (I = 0.04CV or not more than 3мкА, after 2 min.
Tolerance capacity ±20% at 120hz, 20o
Dielectric loss (max.) ≤0.06 at 120hz, 20oWITH
Impedance Under 20ºC, and 400кГц (see. Table. 1.)
Change settings after 1000 h operation at rated voltage and 105o leakage Current initial value, or less than
capacitance Change within ±20% from the initial value
&Tandelta; less than 150% of the initial value
High temperature high humidity, steady state (after 500 hours of operation at rated voltage at 60oC and relative humidity 90%) leakage Current less than 300% from the initial value
capacitance Change -20%
+40%
initial value
Tan δ less than 150% of the initial value
 

an Example of a symbol

FC 1C 225 VR 7343A ºº
Code
Size (L=7.3; W=4.3)
Installation
Tolerance capacity, ±20%
Tank, 2.2 uf
Voltage, 16 In
Series

dimensions and maximum current ripple

L W W1 H S
7.3 G J C




Uf\IN 6.38 10 12.516
IMP RC IMP RC IMP RC IMP RC IMP RC
2.2 0.4 1.3
4.7 0.4 1 0.4 1.0
6.8 0.4 1 0.4 1
8.2 0.4 1 0.4 1 0.4 1
10 <0.4/td> 1 0.4 1.3 0.4 1
15 0.4 1
*Note: RC - current ripple (Ma rms) at 85 oC and 100 Khz. IMP (Ω) max. at 20 °C and 400 Khz