Capacitors, Series LM



  • flap conclusions
  • suitable for use in the sources of power and manufacturing equipment
Capacitors, Series LM
Interval of working temperatures WV≤350: -40 to+85oC, WV>350: -25 to+85oC
leakage Current (max) I = 3ÖCV (Ica) (after 5 minutes)
Tolerance capacity ±20% at 120hz, 20o
the Tangent of the angle
losses (max)
at 120hz, 20o
storage > 1000 Uf: Tanδ rises by 0.01 for every 1000 Uf from below
the meaning of
WV 16 25 35 vac 63 80 vac 350 to 450
Tanδ 0.35 0.30 0.25 0.20 <0.25/td>

Change settings after 2000 hours at rated voltage and 85o

leakage Current less than the normalized value
capacitance Change within ±20% from the initial value
Tanδ less than 200% of the normalized value
Persistence at 85o After 1000 hours of operation tests of the leakage current, capacitance and Tanδ. Values should not differ from the values in the load mode.

Schematic (units in mm)

 

ø(D 35 40 51
Size
Code TK LA LD

 

ø(D 25.4 30 35 40 51
P 10 10 14 18 18
α 1 2
β 2 3

 

dimensions and the maximum allowable current ripple

Icf/16
25
35
40
50
øDxL
 (mm)
RC (Ma rms)
85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
3300 25.4x30 2.46 25.4x30 2.46
4700 25.4x30 2.89 25.4x40 3.21 25.4x40 3.21
6800 25.4x30 3.12 25.4x40 3.73 25.4x50 4.07 25.4x50 4.07
10000 25.4x30 3.42 25.a 4x40 4.03 25.4x50 4.71 25.4x60 5.07 30x50 August
15000 25.4x40 4.41 25.4x50 5.07 30x50 5.81 30x60 6.24 35x60 6.67
22000 25.4x50 5.44 30x50 6.15 35x60 7.44 35x60 7.44 35x80 8.34
33000 30x50 6.57 35x60 7.85 35x80 9.18 35x80 9.18 40x100 10.6
47000 35x60 8.19 35x80 9.49 40x100 11.3 51x105 12.5 51x105 12.5
68000 35x80 9.85 40x100 11.6 51x105 aug
100000 40x100 12.0 51x105 13.5
150000 51x105 13.9

 

Icf/63
80
100
160
200
øDxL
 (mm)
RC (Ma rms)
85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
330 25.4x30 0.92 25.4x30 0.92
470 25.4x40 fiat 25.4x40 fiat
680 25.4x50 refinancing 25.4x50 refinancing
1000 25.4x30 refinancing 25.4x60 2.09 30x50 2.09
1500 25.4x30 1.92 25.4x40 2.13 30x60 2.69 35x60 2.87
2200 25.4x30 2.05 25.4x40 2.52 25.4x50 2.75 35x60 3.40 35x80 3.81
3300 25.4x40 2.73 25.4x50 first 30x50 3.55 35x100 5.02 40x100 5.27
4700 25.4x50 3.50 25.4x60 4.14 35x60 babe 40x100 6.15 51x105 6.80
6800 25.4x60 4.38 30x60 5.15 35x80 6.17 51x105 7.86
10000 30x60 5.46 35x80 7.08 40x100 8.16
15000 35x80 7.48 40x80 8.43 51x105 10.2
22000 35x100 9.16 51x105 11.3
33000 51x105 11.7

 

Icf/250
315
350
400
450
øDxL
 (mm)
RC (Ma rms)
85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
øDxL
(mm)
RC (Ma rms)
 85oWITH 120 Hz
68 25.4x30 0.37
100 25.4x30 0.51 25.4x30 0.45 25.4x40 0.50
150 25.4x30 0.62 25.4x40 0.69 25.4x40 0.62 25.4x50 0.67
220 25.4x30 0.75 25.4x40 0.84 25.4x50 0.91 25.4x50 0.81 30x50 0.88
330 25.4x40 1.02 25.4x50 1.12 25.4x60 1.20 30x60 1.16 35x60 1.24
470 25.4x50 1.33 25.4x60 1.43 30x60 current 35x60 1.47 35x80 1.65
680 30x50 1.73 30x60 mirror 35x60 1.98 35x80 1.99 35x100 2.18
1000 30x60 2.25 35x70 2.56 35x100 2.96 40x100 2.78 51x80 2.77
1500 35x80 3.22 35x100 3.54 40x100 3.72 51x105 3.69
2200 35x100 4.19 40x100 4.40 51x105 4.86
3300 51x80 5.24 51x105 5.82