Capacitors, Series NC



  • Height 5.5 mm.
  • Designed for surface mounting and installation on the PC-boards.
  • Adapted for the automatic installation of the card using a mounting tape machine type.
Series NC
Temperature range -40 ~ +85oC
leakage Current (max.) (I = 0.05CV or 10 Ica after 2 min.
Tolerance capacity ±20% at 120hz, 20o
loss Tangent,
max (at 120 Hz and 20o)
WV 6,3 10 16 25 35 <50/td>
Tan δ money 0,20 0,17 0,17 0,15 0,15
low Temperature performance (impedance when 120hz) WV 6,3 10 16 25 35 50
Z-25oWITH/Z+20o 4 3 2 2 2 2
Z-40oWITH/Z+20o 8 6 4 4 3 3
Change settings after 2000 hours of operation at rated voltage and 85o leakage Current less than the normalized value
capacitance Change within ±20% of the initial value
Tanδ less than 200% of the the normalized value
control Method change the polarity of every 250 hours
the Resistance of the membrane with 85o After 1000 hours of operation tests on the leakage current capacity and Tanδ. Values should not differ from the values in the load mode.
Resistance to the temperature of soldering
(The values are measured at the restoration of the temperature of the 20oWITH after soldering temperature 250oC for 30 seconds.)
leakage Current initial value or less
capacitance Change not more than 10% from the initial value
Tan δ initial value or less

dimensions and maximum current ripple


Ø(D W B C E
4 4,8 4,3 4,3 4,1
5 6,0 5,3 5,3 1,4
6,3 7,1 6,6 6,6 2,2


Uf\IN 6.310 16 25 35 50
ø(D RC ø(D RC ø(D RC øD RC ø(D RC ø(D RC
0,1 4 1,0
females 4 2,0
0,33 4 2,8
0,47 4 4,0
1,0 4 8,4
2,2 4 8,4 5 13
3,3 5 12 5 16 5 17
4,7 4 12 5 16 5 18 6,3 20
10 4 17 5 23 6,3 27 6,3 29
22 5 28 6,3 33
33 6,3 37 6,3 41
47 6,3 45
*Note: RC - current ripple (Ma rms) at 85 oC and 120 hz. ø(D-frame size (mm.);