Capacitors, Series RC



  • the Temperature range from -55oC to+105oC
  • Designed for surface mounting and installation on the PC-boards.
  • Adapted for the automatic installation of the card using a mounting tape machine type.
Series RC
Temperature range -55 ~ +105oC
leakage Current (max.) (I = 0.01CV or 3 Ica after 2 min.
Tolerance capacity ±20% at 120hz, 20o
loss Tangent,
max (at 120 Hz and 20o)
WV 6,3 10 16 25 35 50
Tan δ finance 0,23 0,19 0,15 0,13 0,11
low Temperature performance (impedance when 120hz) WV 6,3 10 16 25 35 50
Z-25oWITH/Z+20o 3 3 2 2 2 2
Z-40oWITH/Z+20o 8 5 4 3 3 3
Change settings after 1000 h operation at rated voltage and 105o leakage Current less than the normalized value
capacitance Change within ±25 % of the initial value
Tanδ
less than 200% of the normalized value
the Resistance of the membrane with 105o After 1000 hours of operation tests on the leakage current capacity and Tanδ. Values should not differ from the values in the load mode.
Resistance to the temperature of soldering
(The values are measured at the restoration of the temperature of the 20oWITH after soldering at a temperature of 250oC for 30 sec.)
leakage Current less than the normalized value
capacitance Change within ±15 % of the initial value
Tanδ initial value or less

dimensions and maximum current ripple


Ø(D W B C E
4 4,8 4,3 4,3 1,0
5 6,0 5,3 5,3 1,4
6,3 7,1 6,6 6,6 2,2


Uf\IN 6.310 16 25 35 50
ø(D RC ø(D RC ø(D RC øD RC ø(D RC ø(D RC
0,1 4 x 5.3 2,3
females 4 x 5.3 3,4
0,33 4 x 5.3 4,1
0,47 4 x 5.3 4,9
1,0 4 x 5.3 7,2
2,2 4 x 5.3 10,7
3,3 4 x 5.3 13,1
4,7 4 x 5.3 13 4 x 5.3 14 5 x 5.3 18,1
10 4x5,3 17 5x5,3 23 5x5,3 24 6,3x6,3 30,8
22 4x5,3 22 5x5,3 27 5x5,3 30 6,3х5,3 39 6,3х5,3 42 6,3х5,8 45
33 5x5,3 31 5x5,3 33 6,3х5,3 43 6,3х5,3 48 6,3х5,8 52 6,3х7,7 60
47 5x5,3 36 6,3х5,3 46 6,3х5,3 51 6,3х5,8 59 6,3х5,8 63 6,3х7,7 63
100 6,3х5,3 50 6,3х5,8 64 6,3х5,8 64 6,3х7,7 91
220 6,3х7,7 86 6,3х7,7 105 6,3х7,7 105
330 6,3х7,7 105
*Note: RC - current ripple (Ma rms) at 105 oC and 120 hz. ø(D-frame size (mm).