Capacitors, Series RZ



  • High reliability, service-life of 5,000 hours at +105oC
  • Very low impedance at high frequency
  • Ideally suited for use in pulsed sources of power supply
Series RZ
Temperature range -55 ~ +105oC
leakage Current (max.) I = 0.01CV or 3 Ica after 2 min.
I = 0.03CV or 4 Ica after 1 min.
Tolerance capacity ±20% at 120hz, 20o
loss Tangent,
max (at 120hz and the 20o)
For a capacity of more than 1000 uf Tanδ rises by 0.03 for every subsequent 1000 uf.
WV 6.3 10 16 25 35 50 63
Tan δ 0.22 0.19 issue quotations 0,12 0,10 yes
low Temperature performance
(impedance when 120hz)
WV 6.3, 10 16 ~ 35 50, 63
Z-55oWITH/Z+20o 4 3 2
Change settings after 5000 hours of operation at rated voltage and 105oWITH
(ø5, 6.3 products for 2000 hours, ø8 - to 3000 hours)
leakage Current less than the normalized value
capacitance Change within ±20% of the initial value
Tanδ less than 200% of the normalized value
Resistance shell after charging is not under load, with 105ofor 1000 hours leakage Current less than the normalized value
capacitance Change within ±20% of the initial value
Tanδ less than 150% of the normalized value

dimensions and maximum current ripple


Ø(D 5 6.3 8 10 12.5 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Ø(d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
β 1.0 2.0

Uf\IN 6.310 16 25
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
105oWITH
120hz
105oWITH
100 Khz
105oWITH
120hz
105oWITH
100 Khz
105oWITH
120hz
105oWITH
100 Khz
105oWITH
120hz
105oWITH
100 Khz
33 5x11 0.80 88 155
47 5x11 0.80 92 155 6.3x11 0.55 125 210
68 5x11 0.80 97 155 6.3x11 0.50 135 220 6.3x11 0.36 160 260
100 5x11 0.85 99 150 6.3x11 0.55 135 210 6.3x11 0.35 175 265 8x11.5 0.24 254 383
150 6.3x11 0.49 155 225 6.3x11 0.35 185 265 8x11.5 0.23 270 388 8x11.5 0.16 320 460
220 6.3x11 0.30 205 285 8x11.5 0.24 283 387 8x11.5 0.16 335 460 10x12.5 0.13 435 600
330 8x11.5 0.20 223 292 8x11.5 0.16 350 460 10x12.5 0.12 480 625 10x16 0.095 575 750
470 10x12.5 0.14 455 575 10x12.5 0.13 475 600 10x16 0.09 615 770 10x20 0.065 810 driver
680 10x16 0.11 580 700 10x16 0.09 635 770 10x20 0.065 845 driver 12.5x20 0.046 1392
1000 10x20 0.075 820 950 10x20 0.060 915 1060 12.5x20 <0.047/td> 1206 1410 12.5х25 0.036 1430 1660
1500 10x25 0.055 1090 1220 12.5x20 t 1266 1417 12.5x25 <0.036/td> 1490 1660 16x20 0.034 1590 1770
2200 12.5х20 0.043 1296 1438 12.5x25 0.034 1530 1710 16x20 0.033 1620 1800 16x25 0.028 1848 2051
3300 12.5х25 0.034 1530 1710 16x20 0.031 1660 1850 16x25 <0.027/td> 1888 2095 16x35.5 0.020 2410 2680
4700 16 х25 0.032 1728 1935 16x31.5 0.023 2170 2420 16x35.5 <0.020/td> 2410 2680 18x40 0.018 2660 2960
6800 16х31.5 0.024 2130 2370 16x35.5 0.020 2410 2680 18x35.5 0.018 2610 driver
10000 16х40 0.020 2470 2750 18x40 0.017 2730 3040
15000 18х40 0.018 2660 2960

Uf\IN 35 50 63
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
105oWITH
120hz
105oWITH
100 Khz
105oWITH
120hz
105oWITH
100 Khz
105oWITH
120hz
105oWITH
100 Khz
1.0 5x11 4.0 18 36
1.5 5x11 3.8 22 45
2.2 5x11 3.5 27 54
3.3 5x11 3.0 33 66
4.7 5x11 2.2 40 81
6.8 5x11 1.8 45 91
10 5x11 1.4 57 115 5x11 1.06 67 135
15 5x11 0.93 72 145 6.3x11 0.73 92 185
22 5x11 0.75 85 160 6.3x11 <0.65/td> 100 195 6.3x11 0.52 110 215
33 6.3x11 0.49 125 225 6.3x11 0.43 135 240 8x11.5 0.35 179 320
47 6.3x11 and 160 270 8x11.5 0.30 204 344 8x11.5 0.25 215 365
68 8x11.5 0.24 239 384 8x11.5 0.20 255 410 10x12.5 0.19 310 495
100 8x11.5 0.16 305 460 10x16 0.16 385 581 10x20 0.12 495 750
150 10x12.5 0.12 435 625 10x20 0.10 570 820 10x25 0.09 665 950
220 10x16 0.09 560 770 10x25 0.075 760 1040 12.5x20 0.065 835 1140
330 10x20 0.060 810 1060 12.5x20 0.055 978 1281 12.5x25 0.049 1090 1420
470 12.5x20 0.046 1112 1401 12.5x25 0.044 1190 1500 16x25 0.042 1350 1700
680 12.5x20 0.036 1370 1660 16x20 0.040 1350 1630 16x31.5 0.032 1700 2050
1000 16x20 0.034 1330 1770 16x31.5 0.030 1830 2120 18х35.5 0.029 1970 2280
1500 16x31.5 0.028 2149 2385 16x40 0.026 2170 2410
2200 16x35.5 0.020 2410 2680 18x40 0.024 2300 2560
3300 18x40 0.017 2730 3040