Capacitors, Series WB



  • High reliability, service-life of 5,000 hours at +105oC (2000 vac 4000 hours for smaller dimensions of the enclosure as defined below)
  • Higher current ripple, a decrease of high-frequency
  • For switching to high-power devices, шумоподавляющих filters, adapters, chargers.
  • Low impedance compared with a series of WD
Series WB
Operating temperature range -40 ~ +105oC
leakage Current (max.) I = 0.01CV or 3 Ica after 2 min.
I = 0.03CV or 4 Ica after 1 min.
Tolerance capacity ±20% at 120hz, 20o
loss Tangent,
max (at 120 Hz and 20o)
For a capacity of more than 1000 uf Tanδ increases by 0.02 for every subsequent 1000 uf.
WV 6.3 10 16 25 35 50 63 100
Tan δ 0.22 0.19 0.16 0.14 0.12 0,10 0.09 0.08
low Temperature performance
(Coefficient of impedance at 120hz)
Z-40oWITH/Z+20o Z-25oWITH/Z+20o
3 2
Change settings after 5000 hours of work at nominal voltage and 105oWITH
(ø5, 6.3 products for 2000 hours, ø8 - to 3000 hours)
leakage Current less than the normalized value
capacitance Change within ±25% of the initial value
Tanδ less than 200% of the normalized value
the Resistance of the membrane with 105o After 1000 hours of operation tests on the leakage current capacity and Tanδ. Values should not differ from the values in the load mode.

dimensions and maximum current ripple


Ø(D 5 6.3 8 10 12.5 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Ø(d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
β 1.0 2.0

Uf\IN 6.310 16 25
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
105oWITH
100 Khz
105oWITH
100 Khz
105oWITH
100 Khz
105oWITH
100 Khz
4.7 5x11 0.35 250
10 5x11 0.35 250 5x11 0.35 250
22 5x11 0.35 250 5x11 0.35 250 5x11 0.35 250 5x11 <0.35/td> 250
33 5x11 0.35 250 5x11 0.35 250 5x11 0.35 250 5x11 0.35 250
47 5x11 0.30 250 5x11 0.30 250 5x11 0.30 250 5x11 0.30 250
100 5x11 0.30 250 5x11 0.30 250 6.3x11 0.15 405 6.3x11 0.15 405
150 6.3x11 0.15 405 6.3x11 0.15 405 6.3x11 0.15 405 8x11.5 0.072 760
220 6.3x11 0.15 405 <6.3x11/td> 0.15 405 8x11.5 0.072 760 8x11.5 0.072 760
330 6.3x11 0.15 405 8x11.5 0.072 760 8x11.5 0.072 760 10x12.5 0.053 1030
470 8x11.5 0.072 760 8x11.5 0.072 760 10x12.5 0.053 1030 10x16 0.038 <1430/td>
680 10x12.5 0.053 1030 10x12.5 0.053 1030 10x16 0.038 1430 10x20 0.027 1820
1000 10x12.5 0.053 1030 10x16 0.038 1430 10x20 0.027 1820 12.5x20 0.025 2360
1500 10x20 0.027 1820 10x20 0.027 1820 12.5x20 0.025 2360 16x20 0.015 3460
2200 12.5х20 0.025 2360 12.5x20 0.025 2360 12.5x25 0.018 2770 16x25 0.015 3460
3300 12.5х20 0.025 2360 12.5x25 0.018 2770 16x25 0.015 3460 16x31.5 0.015 3680
4700 16х25 0.015 3460 16x25 0.015 3460 16x31.5 0.015 3680 18x35.5 0.014 3800
6800 16х25 0.015 3460 16x31.5 0.015 3680 18x35.5 <0.014/td> 3800
10000 16х31.5 0.015 3680 18x35.5 0.014 3800
15000 18х35.5 0.014 3800

Uf\IN 35 50 63 100
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
øDхL
(mm)
Impedance
(Ω) max
20oWITH
100 Khz
RC
(Ma rms
105oWITH
100 Khz
105oWITH
100 Khz
105oWITH
100 Khz
105oWITH
100 Khz
optional 5x11 2.0 250
1.0 5x11 2.0 250
2.2 5x11 2.0 250 5x11 2.0 125
3.3 5x11 1.0 250 5x11 2.0 165 5x11 2.0 125
4.7 5x11 0.35 250 5x11 1.0 250 5x11 2.0 165 5x11 2.0 125
10 5x11 0.35 250 5x11 0.50 250 5x11 0.45 165 6.3x11 0.50 205
22 5x11 0.35 250 5x11 0.26 250 6.3x11 0.30 265 8x11.5 0.30 355
33 5x11 0.30 250 6.3x11 0.17 405 6.3x11 0.30 265 10x12.5 0.25 450
47 6.3x11 0.15 405 6.3x11 0.14 405 8x11.5 0.20 500 10x16 0.20 580
100 8x11.5 0.072 760 8x11.5 0.072 760 10x16 0.10 945 12.5x20 0.10 1045
150 8x11.5 0.072 760 10x12.5 0.061 1030 10x20 0.08 1100 12.5x25 0.070 1195
220 10x12.5 0.053 1030 10x16 0.038 1430 10x25 0.07 1300 16x25 0.060 1600
330 10x16 0.038 1430 10x20 0.027 1820 12.5x20 0.04 1495 16x31.5 0.040 1750
470 10x20 0.027 1820 12.5x20 0.025 2360 16x20 shift 1990 18x40 0.030 2060
680 12.5x20 0.025 2360 12.5x25 0.020 2770 16x25 0.030 2780
1000 12.5x25 0.018 2770 16x25 0.018 3460 16х35.5 0.025 2835
1500 16x25 0.015 3460 16x31.5 0.015 3680
2200 16x31.5 0.015 3680 18x35.5 0.014 3800
3300 18x35.5 0.014 3800